Description
Program 1: Tropical rain with fragrance
After pressing the button in the shower cabin, the lighting changes from white room light to red. A warm tropical rain with thick, soft drops falls on the showerers. A fruity scent fills the room. The sound of the sea can be heard in the distance. At the end of the program, the lighting changes back to room light, the tropical rain with fragrance turns off, and the music stops.
Program 2: Mist shower
After pressing the button in the shower cabin, the lighting changes from white to blue. A cold, refreshing mist spray with very fine water droplets begins to spray. You can hear a mountain stream babbling. At the end of the program, the lighting changes back to room light, the mist turns off, and the music stops.
Program 3: Side showers
After pressing the button in the shower cabin, the lighting changes from white room light to green. Warm side showers massage those standing in the shower. You can hear birds chirping. At the end of the program, the lighting changes back to room lighting, the side showers turn off, and the music is switched off.
Program 4: Caribbean Storm
The program starts with the warm side showers and the green light. You can hear birds chirping. Then, warm tropical rain enters with thick, soft drops and works in combination with the side showers. A fruity scent fills the room. A thunderstorm approaches; you hear thunder and lightning. The thunderstorm ends in the final program step. The tropical rain stops and the cold mist sprays together with the warm side showers. The lighting automatically changes to a blue-green color cycle and the birds chirp again. At the end of the program, the lighting changes back to room light, the side showers, the mist, and the music turn off.
SCOPE OF SUPPLY
Control panel Caribbean Storm Rain Shower SED2 consists of:
2 x inlet with pre-filter and ball valve MS 3/4" FNPT
Thermomixer JRG 3/4" with check valves
2 x outlets with solenoid valve 1/2" (1x hot / 1x cold) and screw connection 1/2"
1 x outlet with solenoid valve 3/4" (hot) and screw connection 3/4"
Outlet for the line to the fragrance rain head
Dosing pump with fragrance reservoir and empty indicator
Dosing valve for injecting the fragrance into the line
Pipe separator according to DIN EN1717
Microprocessor control EDS1 in the housing
Fully piped and pre-wired on a grey PP mounting plate
The nozzles, lighting, and button panel must be ordered separately.
ON-SITE REQUIREMENTS
Technical room / cabinet for placing the control panel
Power supply
Cold water connection 3/4"
3/4" hot water connection
Required pressure at the transfer point: flow pressure 3 bar
Maximum water volume: 70 l/min when using 2 rain / 2 mist nozzles and 6 WDT side showers
Pipes to the nozzles
Drain / sump in the technical room