With the WK4 experience shower, a Kneipp alternating shower is achieved via side showers from the legs to the heart. After being activated by a button, the lighting changes from white room light to blue. The bottom pair of side showers starts with cold water at leg height. After an adjustable time, the pair of nozzles at hip height follows, then a pair at stomach level, and finally the top pair at shoulder level. Now the temperature changes from cold to warm water, the light changes to red, and the 4 pairs of nozzles operate in reverse order from top to bottom. At the end of the program, the lighting changes back to room lighting and the showers switch off.
SCOPE OF SUPPLY
WK4 experience shower control panel - alternating shower consists of:
2 x inlet with pre-filter and ball valve MS 1/2" female thread
Thermostatic mixer JRG 1/2" with check valves
4 x outlets with solenoid valve 1/2" and screw connection 1/2"
2 x solenoid valve 1/2" for switching between cold and warm
Microprocessor control EDS1 in housing
Fully piped and pre-wired on gray PP mounting plate
The nozzles, lighting, and button panel must be ordered separately.
REQUIRED ON SITE
Technical room / cabinet for installing the control panel
Power supply
Water connection cold 1/2"
Water connection warm 1/2"
Required pressure at the transfer point: flow pressure 3 bar
Water volume: maximum 72 l/min when using 8 WDT side showers
Pipes to the nozzles
