HotSpring ozone injector

Type of Product:	Ozone Injector
Manufacturer:	Hotspring
How it Works:	The Ozone does not blow air; air is drawn through the Ozone on a venturi system. Usually, you will find a designated water jet plumbed into the shell of the Hot Tub somewhere near the centre or sometimes a drain. Water will pass through the jet, sucking in air through the Ozone injector which will be connected to the Ozone.
Compatible With:	This unit can be fitted to virtually any Hot Tub with a venturi system. Can be used with Spaform, Aegean, Leisurerite, Leisure Bay, Hotspring, Sundance, Marquis, Master Spa, Signature, Southwest Spas, Hydrospa, Hydropool, QCA, Sunset, Sunrise, Sunbelt, Beechcoomber, LA Spas, Dimension 1, Saratoga, Emerald Spa, Sapphire Spas and more...
Connections / Fixings:	3/4 inch barb style connections on both ends to connect to the water line. It also has a 3/8 inch barb style connector to connect the air pipe from the Ozone. It is best to use 2 small metal clips or jubilee clips to hold it in place, as well as glue.
Dimensions:	Length: 150 mm Diameter: 75 mm
Additional Notes:	The top part is removable to clean away scale and dirt build-up; this should always be done during a full annual service to help with air flow.