EGO3 Filter Cartridge - F2M (2" fine thread)
If you are looking for an alternative to your paper spa filter, then this innovative way of filtering with EGO³ filter cartridges is highly recommended.
The filter balls (refill) can be reused up to 6 times and are made from recycled material, which is also good for the environment. Sediment reduction is achieved through their reusability and the sediment stays in the filter until the filter material is completely exhausted, even while unscrewing the EGO³-F2M filter.
This innovation in the field of filtration is partly due to its small separation precision of 10 µm. The spa water being filtered does not cause blockages, ensuring that circulation remains optimal.
The dimensions of the EGO³ F2M may vary, but there is sufficient space to place the filter in the spa.
Please note: filter balls are not included; these must be ordered separately.
When using the EGO³ Cartridge F2M, first open the filter reservoir by turning the lid to the middle edge. Make sure the sieve element is positioned directly under the filter reservoir (the filter must never be used without the sieve element). A maximum of 12-14 filter balls can be placed in the filter reservoir. The filter balls must not be compressed and must always have enough space; if not, the filter may become clogged. Finally, close the lid by turning it to the right and place it in the spa.
The EGO³ - F2M cartridge filter replaces the filters below
SC807 - SC739 - SC754 - SC720 - SC772 - SC701 - SC703 - SC719 - SC826 - SC831- SC747
Features of EGO³ filter material
- high filter volume thanks to 3D filter material
- no blockages (meaning the spa can always heat, circulate, and disinfect)
- dirt always stays trapped in the filter
- long lifespan (filter balls can be reused up to 6 times)
- extra disinfection of filter material through the built-in silver component
- filters up to 5 times finer (10 µm separation precision)
- economically responsible thanks to reuse
- savings on spa chemicals
- made from recycled material
