EGO3 Filter Cartridge - P3 (1½" coarse thread)
If you are looking for an alternative to your paper spa filter, this innovative way of filtering with EGO³ filter cartridges is highly recommended.
The filter balls (refill) can be reused up to 6 times and are made from recycled material, which is also good for the environment. Due to its reusability, sediment is reduced and remains trapped in the filter until the filter material is completely saturated, even while unscrewing the EGO³-P3 filter.
This innovation in filtering is partly due to its small separation precision of 10 µm. The filtered spa water does not clog, ensuring that circulation remains optimal.
The dimensions of the EGO³ P3 may vary, but there is sufficient space to place the filter in the spa.
Please note: filter balls are not included and must be ordered separately.
When using the EGO³ Cartridge P3, first open the filter reservoir by turning the lid to the center edge. Ensure that the sieve element is positioned directly under the filter reservoir (the filter must never be used without the sieve element). A maximum of 12-14 filter balls should be placed in the filter reservoir. The filter balls must not be compressed and must always have enough space; otherwise, the filter may become clogged. Finally, close the lid by turning it to the right and place it in the spa.
The EGO³ - P3 cartridge filter replaces the filters below
SC752 - SC714 - SC798 - SC846 - SC728 - SC737
Features of EGO³ filter material
- high filter volume thanks to 3D filter material
- no blockages (meaning the spa can always heat, circulate, and disinfect)
- dirt always remains trapped in the filter
- long service life (filter balls can be reused up to 6 times)
- extra disinfection of filter material through the built-in silver component
- filters up to 5 times finer (10 µm separation precision)
- economically responsible thanks to reusability
- savings on spa chemicals
- made from recycled material
The filter has a maximum diameter of 157 mm
The total height is 225 mm (including the length of the thread) and 200 mm without the thread.
