AquaFinesse Hot Tub Switch kit

Would you like to get acquainted with our AquaFinesse products or switch from your current water treatment products to AquaFinesse? Then choose the AquaFinesse Switch kit. With this kit, you can try our AquaFinesse Hot Tub product for up to 6 weeks for unbeatable water quality. In addition, this kit also includes two AquaFinesse Filter Cleaner tablets for cleaning your filter and an AquaFinesse SpaClean tablet to clean your spa before you start using AquaFinesse.

What makes our switch kit unique?

Everyone has probably experienced the feeling of slippery hot tub walls at some point. As if there is a layer of slime on them. This is called Biofilm. Many bacteria nest in this. Traditional products such as chlorine can barely penetrate this layer (biofilm), which is why a very large quantity is needed to reach the bacteria. This results in a very high dose of disinfectant entering the water. This causes negative side effects for your skin, eyes, and respiratory system. Our unique and patented AquaFinesse formula, unlike other products, is capable of loosening this biofilm layer from the walls and breaking it open, so the bacteria can no longer hide. Now you only need a small amount of disinfectant.

With just one dose per week, our switch kit ensures clean, silky-soft, and crystal-clear water. In addition, the AquaFinesse formula ensures that your hot tub components last longer by preventing limescale buildup in your hot tub/spa!

Preparation:

It is important to start with a clean spa. Your piping, in particular, may be contaminated. This also applies to new spas.
With our AquaFinesse SpaClean, your old or new spa will receive a thorough cleaning. For detailed instructions on using the
AquaFinesse SpaClean tablet, please refer to the manual.

Below you will find abbreviated instructions.
1. Remove the filters for maximum flow.
2. Check that all jets, waterfalls, and valves are open.
3. Dissolve the AquaFinesse SpaClean tablet in a bucket of water.
4. Add this to your spa water.
5. Activate the pumps at full power at least 2-3 times over the next 24 hours.
6. Remove all water, preferably via the spa's drain. Your spa is now clean.
7. Fill the spa with regular tap water and bring it up to temperature before you start with the water maintenance.*

Weekly maintenance (preferably on a fixed day):

a. Place clean filters in the spa. (This kit contains a trial pack with two AquaFinesse Filter Cleaner tablets to clean your filter.)
b. Place a SWE disinfection tablet 90 in the dispenser and place the dispenser in the skimmer or grid/basket.
There should always be a tablet present in the dispenser.
c. Add the prescribed amount of AquaFinesse to the water using the included measuring cup.
d. Open all valves and jets. Run the pumps at full power for approx. 1 minute.