AquaFinesse SpaClean
Our AquaFinesse SpaClean tablet thoroughly cleans the pipes and internal components of your spa. Even with a new spa, water often remains in the pipes because manufacturers test the spa before it hits the market. This often leads to the formation of biofilm and limescale in the pipes before you even start using the hot tub. This reduces the lifespan of your spa and the quality of the water. That is where AquaFinesse SpaClean comes in. It cleans your entire spa, including the plumbing, and removes accumulated biofilm and limescale from your pipes.
In addition, we also recommend cleaning with this AquaFinesse SpaClean tablet before you change the water. This is typically done every 3-4 months.
Simple instructions
1. Remove the filter and open all valves. Increase the chlorine level in your spa to between 3-5ppm before starting the deep clean.
2. Ensure that all jets and air valves are open. Dissolve the AquaFinesse SpaClean tablet in a bucket of lukewarm water before adding it to the spa water.
3. Switch on the pumps and let them run at full power for 20 minutes.
4. Repeat the pump activation 2-3 times during the cleaning process.
The recommended treatment time is 12-24 hours. (Depending on the severity of the problem)
5. Drain the water and rinse the hot tub thoroughly. Now fill the hot tub with clean tap water.
6. Resume or start maintenance with the AquaFinesse hot tub water treatment.
