HotSpring ozone Injector

Type of Product:	Ozone Injecter
Manufacturer:	Hotspring
How it Works:	The Ozone does not blow air, air is drawn through the Ozone on a venturi system. Usually, you will find a designated water jet plumbed into the shell of the Hot Tub somewhere near the centre or sometimes a drain. Water will pass through the jet sucking in air through the Ozone injector which will be connected to the Ozone.
Compatible With:	This unit can be fitted to virtually any Hot Tub with a venturi system. Can be used with Spaform, Aegean, Leisurerite, Leisure Bay, Hotspring, Sundance, Marquis, Master Spa, Signature, Southwest Spas, Hydrospa, Hydropool, QCA, Sunset, Sunrise, Sunbelt, Beechcoomber, LA Spas, Dimension 1, Saratoga, Emerald Spa, Sapphire Spas and more...
Connections / Fixings:	3/4 inch barb style connections both ends to connect to the water line. It also has a 3/8 inch barb style connector to connect the the air pipe from the Ozone. Best to use 2 small metal clips or jubilee clips to hold in place as well as glue.
Dimensions:	Length: 150 mm Diameter: 75 mm
Additional Notes:	The top part is removeable to clean away scale and dirt build up, this should always be done on a full annual service to help with air flow.